China 52cc Gas Powered Post Hole Digger Digging Tools with High Quality wholesaler

Product Description

1 person operate EARTH AUGER MACHINE Basic info

HY-GD550-TD-801

One of economical , suitable for 1 person operate model ,with 52cc engine Earth auger .  Removable & Adjustable ( up and down) handle design is main characteristic . 
Base on this design  , could make package volume is small &  easy to assy .  Also  after assy tha handle ,the width is suitable for human mechanics, easy to control. 
Max drive ability is ≤ φ 250mm auger bit . The most popular package way is Earth auger with manual , tool kits and other attached accessories of the earth auger packaged
 in one carton/ color box . 
Certificate : EC  EMC  EURO-V  EPA  ISO9001-2015
Engine model: 1E44F-5   2 stroke Trigger :(Optional )
Engine power: 1.63kw / 8800±300 rpm/min      * Simple  
Displacement : 52CC      * Simple with waterproof keep switch button
Max output speed:8800±300 rpm/min      * luxury type with automatic reset switch & waterproof keep switch button (Bisc)
Fuel  tank capacity: 1200 ml Vibration reduction system:1 pcs rubber & 1 pcs metal
Fuel  tank :  (Optional ) Transmission: Gear case   (Optional )
    *Normal standard fuel tank  (Basic)     *( 2 stages / Model – GC01-2007 )  (Simple)
    *With external balance air level     *( 2 stages / Model – GC03-2012 ) Stable than GC01-2007
Fuel tank keeper: (Optional ) Gear wheel metrial :20CrMnTi
    * Without  Gear wheel structure : Helical (rounded corner)
    * Simple metal   Main gear wheel contact with output shaft : Spline
    * Luxury / Plastic metrial  / Fully surrounded   (Standard) Output rate:  (Optional )
Gas: Gasoline mix 2 stroke Oil (twenty five:1)    * 29:1  (Simple)     /      * 10:1   /      *5:1
Clutch : 2 Pcs hoof blocks  Output shaft type :  (Optional )
Starting systerm : Recoil     * Spline
Starter: (Optional )     * Cylinder φ20mm (Simple)
    *Normal starter     * Cylinder φ22mm
    * Normal easy starter Max drive ability : ≤ φ 250mm  auger bit
    *Supper easy starter:2 pcs springs & 1 pcs needle bearing (Basic)  
Handle :Removable  Adjustable ( up and down) Auger bit size :  φ40/sixty/eighty/100/150/two hundred/250mm
Others info
G.W/N.W :9.3/8.63  kg Package size : 39X29X29.5CM (Standard)
HS code :8467890000 Package way : Color box/ Carton (Standard) / with auger bits for sets by carton
Production time : 25-30 days Shipment port : HangZhou / ZheJiang  
Notice 
1. Marked as (Standard) in the technical parameters is completely consistent with the product picture.
2. Marker as (Optional) . buyer can according to actually need to choose

 

To Be Negotiated 20 Pieces
(Min. Order)

###

Feature: 2-Stroke
Bit Diameter(mm): 200
Style: Chinese Style
Power Source: Petrol / Gas
Engine Model: 1e44f-5
Displacement: 52cc

###

Samples:
US$ 60/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

1 person operate EARTH AUGER MACHINE Basic info

HY-GD550-TD-801

One of economical , suitable for 1 person operate model ,with 52cc engine Earth auger .  Removable & Adjustable ( up and down) handle design is main characteristic . 
Base on this design  , could make package volume is small &  easy to assy .  Also  after assy tha handle ,the width is suitable for human mechanics, easy to control. 
Max drive ability is ≤ φ 250mm auger bit . The most popular package way is Earth auger with manual , tool kits and other attached accessories of the earth auger packaged
 in one carton/ color box . 
Certificate : EC  EMC  EURO-V  EPA  ISO9001-2015
Engine model: 1E44F-5   2 stroke Trigger :(Optional )
Engine power: 1.63kw / 8800±300 rpm/min      * Simple  
Displacement : 52CC      * Simple with waterproof keep switch button
Max output speed:8800±300 rpm/min      * luxury type with automatic reset switch & waterproof keep switch button (Bisc)
Fuel  tank capacity: 1200 ml Vibration reduction system:1 pcs rubber & 1 pcs metal
Fuel  tank :  (Optional ) Transmission: Gear case   (Optional )
    *Normal standard fuel tank  (Basic)     *( 2 stages / Model – GC01-2007 )  (Basic)
    *With external balance air level     *( 2 stages / Model – GC03-2012 ) Stable than GC01-2007
Fuel tank keeper: (Optional ) Gear wheel metrial :20CrMnTi
    * Without  Gear wheel structure : Helical (rounded corner)
    * Simple metal   Main gear wheel contact with output shaft : Spline
    * Luxury / Plastic metrial  / Fully surrounded   (Basic) Output rate:  (Optional )
Fuel: Gasoline mix 2 stroke Oil (25:1)    * 29:1  (Basic)     /      * 10:1   /      *5:1
Clutch : 2 Pcs hoof blocks  Output shaft type :  (Optional )
Starting systerm : Recoil     * Spline
Starter: (Optional )     * Cylinder φ20mm (Basic)
    *Normal starter     * Cylinder φ22mm
    * Normal easy starter Max drive ability : ≤ φ 250mm  auger bit
    *Supper easy starter:2 pcs springs & 1 pcs needle bearing (Basic)  
Handle :Removable ; Adjustable ( up and down) Auger bit size :  φ40/60/80/100/150/200/250mm
Others info
G.W/N.W :9.3/8.63  kg Package size : 39X29X29.5CM (Basic)
HS code :8467890000 Package way : Color box/ Carton (Basic) / with auger bits for sets by carton
Production time : 25-30 days Shipment port : NINGBO / SHANGHAI 
Notice 
1. Marked as (Basic) in the technical parameters is completely consistent with the product picture.
2. Marker as (Optional) . buyer can according to actually need to choose
To Be Negotiated 20 Pieces
(Min. Order)

###

Feature: 2-Stroke
Bit Diameter(mm): 200
Style: Chinese Style
Power Source: Petrol / Gas
Engine Model: 1e44f-5
Displacement: 52cc

###

Samples:
US$ 60/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

1 person operate EARTH AUGER MACHINE Basic info

HY-GD550-TD-801

One of economical , suitable for 1 person operate model ,with 52cc engine Earth auger .  Removable & Adjustable ( up and down) handle design is main characteristic . 
Base on this design  , could make package volume is small &  easy to assy .  Also  after assy tha handle ,the width is suitable for human mechanics, easy to control. 
Max drive ability is ≤ φ 250mm auger bit . The most popular package way is Earth auger with manual , tool kits and other attached accessories of the earth auger packaged
 in one carton/ color box . 
Certificate : EC  EMC  EURO-V  EPA  ISO9001-2015
Engine model: 1E44F-5   2 stroke Trigger :(Optional )
Engine power: 1.63kw / 8800±300 rpm/min      * Simple  
Displacement : 52CC      * Simple with waterproof keep switch button
Max output speed:8800±300 rpm/min      * luxury type with automatic reset switch & waterproof keep switch button (Bisc)
Fuel  tank capacity: 1200 ml Vibration reduction system:1 pcs rubber & 1 pcs metal
Fuel  tank :  (Optional ) Transmission: Gear case   (Optional )
    *Normal standard fuel tank  (Basic)     *( 2 stages / Model – GC01-2007 )  (Basic)
    *With external balance air level     *( 2 stages / Model – GC03-2012 ) Stable than GC01-2007
Fuel tank keeper: (Optional ) Gear wheel metrial :20CrMnTi
    * Without  Gear wheel structure : Helical (rounded corner)
    * Simple metal   Main gear wheel contact with output shaft : Spline
    * Luxury / Plastic metrial  / Fully surrounded   (Basic) Output rate:  (Optional )
Fuel: Gasoline mix 2 stroke Oil (25:1)    * 29:1  (Basic)     /      * 10:1   /      *5:1
Clutch : 2 Pcs hoof blocks  Output shaft type :  (Optional )
Starting systerm : Recoil     * Spline
Starter: (Optional )     * Cylinder φ20mm (Basic)
    *Normal starter     * Cylinder φ22mm
    * Normal easy starter Max drive ability : ≤ φ 250mm  auger bit
    *Supper easy starter:2 pcs springs & 1 pcs needle bearing (Basic)  
Handle :Removable ; Adjustable ( up and down) Auger bit size :  φ40/60/80/100/150/200/250mm
Others info
G.W/N.W :9.3/8.63  kg Package size : 39X29X29.5CM (Basic)
HS code :8467890000 Package way : Color box/ Carton (Basic) / with auger bits for sets by carton
Production time : 25-30 days Shipment port : NINGBO / SHANGHAI 
Notice 
1. Marked as (Basic) in the technical parameters is completely consistent with the product picture.
2. Marker as (Optional) . buyer can according to actually need to choose

Preventative Maintenance on Tractor Parts

You should not take your tractor out of commission by replacing the parts that are not working properly. You should be proactive about maintaining your tractor parts to ensure that they work well and are of the highest quality. You should also check if the company is 10 years old or more, as this will ensure that they have enough experience to handle warranty issues and any other problems. Lastly, you should check if the tractor parts company has a good reputation. Having a long standing company that is available around the clock is a plus.

agriculturalparts

Preventative maintenance of tractor parts

Performing preventative maintenance on tractor parts will help you avoid unexpected breakdowns and enhance its efficiency. Whether you’re the sole owner of a tractor or a part-owner, you should know which parts you need and where to find them. Having spares available is also important, as they can help you solve problems quickly. Listed below are some of the parts you need to know about. These components are essential for your tractor’s engine.

To maintain your tractor’s internal components, check for wear. Lubricate internal parts regularly to reduce friction. When possible, bring your tractor to a dealer for a thorough inspection. Additionally, remember to keep the tractor’s air filter clean. Dust in the air strains the tractor’s engine, and a dirty air filter can cause a lot of damage. By following the manufacturer’s instructions for proper maintenance, you can avoid costly repairs down the road.

For oil changes, check the owner’s manual for recommended oil change intervals. Make notes in the manual about the parts you’ll need. You can also refer to the manufacturer’s PM checklist. Depending on the type of tractor you own, you may need to change the oil once a year or more often. To keep your tractor running optimally, drain old oil after every use. The same goes for hydraulic fluid. Over time, it can become contaminated with particles and water. Therefore, it’s best to change it every year.

Modern tractors use a cooling system with fans and radiators. This system operates in varying temperatures and if it breaks down, you risk damaging the engine’s core parts. In addition, you should store your tractor’s battery under climate control. A battery maintainer can be purchased at any auto parts store. It’s a great idea to regularly inspect your tractor’s engine for problems as early as possible.

Types of tractor clutches

In a modern tractor, there are many types of transmission systems, and this article compares the pros and cons of each type. The original drive system of tractors relied on a clutch to change gears and range and engage/disengage the PTO drive. The clutch was usually a two-stage design; a full depression disengaged all drive systems while a partial depression only disengaged the gearbox. Today, these systems are independent.

The friction plate is a steel plate with a splined central hub. It features annular friction facings and is held between the flywheel and pressure plate. It has splines that limit its axial travel along the gearbox’s driving shaft and dampen torsional vibrations. Single-plate clutches are most commonly used in heavy agricultural equipment. While they were initially developed as a cost-effective alternative to drum brakes, they quickly gained popularity due to their low price and ease of use.

Another type of tractor clutch is the wrap-spring. These use a special cast-iron spring. This spring is able to transmit torque to the driven plate when the tractor is operating at normal engine speed, while the clutch springs help transmit torque to the driven plate when the engine is running at high engine speeds. The wrap-spring clutches must be lubricated with light oil and should be checked for deterioration after a few years.

The advantages and disadvantages of these types of clutches are explained briefly. They are generally made from high-quality materials and contain a high copper content. They have high-friction properties and can transfer heat effectively to the engine. The friction coefficient of these types of clutches ranges from 0.33 to 0.4. As a result, they are the best choice for intensive applications. In conclusion, there are many advantages and disadvantages of each type of tractor clutch.

agriculturalparts

Types of tractor transmission gears

There are several different types of tractor transmission gear. One of the most common is hydrostatic. A hydrostatic transmission works like a standard manual transmission, and operates with a pedal. To operate a hydrostatic transmission, you simply select the gear and engine speed you want, push the pedal, and the hydraulic oil turns the gears. Because this type of transmission is clutchless, it provides smooth forward/backward operation without the need for a manual shifter.

Tractor transmissions come in several types and have different features. Some of these systems are better for certain types of work than others, and you’ll find different types depending on the size and type of your tractor. Many tractors have two types of transmissions: geared speed and power shift. Each type offers different benefits, and they vary in cost and ease of use. There’s a geared speed transmission, a synchromesh transmission, and a power shift transmission.

A CVT (continuously variable transmission) is another popular option. Like hydro, CVTs use a belt to transfer power from the engine to the wheels. These tractors can shift gears with little effort. These tractors can reach up to four speeds without the need for a clutch. Powershift transmissions are simpler and more durable than CVTs. They’re also easier to repair. But a CVT may be the better choice for your farm tractor.

Hydrostatic and power shuttle transmissions allow you to shift gears and direction without the use of a clutch. Hydrostatic transmissions are usually hydraulically actuated, which makes it easy to change gears without using the clutch. Similarly, power shuttle transmissions are great for heavy-duty forward-and-reverse shifting. In either case, the clutches are hydraulically actuated and bathed in oil.

Types of CZPT fittings

In a nutshell, there are two types of CZPT fittings: standard and grease-fill. Standard CZPTs have three to four pumps of grease per fitting. Grease-filled CZPTs tend to attract dirt, dust, and sand, which can damage moving parts. Keeping these parts clean is crucial to their long-term performance. Using a rag to wipe off excess grease is an excellent way to ensure that the seals remain as sealed as possible.

There are different types of grease-filling tools available. Some are specifically designed to clear blocked CZPTs. These tools are used to fill the CZPT fitting with grease or diesel fuel and hit the fitting with a hammer. Be sure to use high-quality fitting rejuvenators, as cheap ones are less effective. These are also harder to find than grease-filling tools. To avoid these issues, use the proper tools when servicing your tractor.

CZPT fittings are used for many different kinds of tractor parts. You may find them on lawn equipment, construction equipment, and farming equipment. If you are unsure of what type your equipment has, ask your local CZPT dealer or visit one of their 17,000 CZPT AutoCare locations. Don’t forget to regularly grease these parts for the best performance. When you don’t have time to do so, they can lead to costly repairs.

Standard CZPTs feature a dome-shaped nipple that makes it easy to spot. Flow-stop fittings feature a ball check valve that reduces backflow during lubrication. Drive-type CZPTs feature a special coupler with a cross-pin to provide a positive lock. This type of grease CZPT eliminates the need for tapping during servicing.

agriculturalparts

Preventative maintenance of tractor’s CZPT fittings

Proper grease application and regular inspections are important parts of CZPT fittings. If a CZPT becomes stuck in an opening, the ball may not be able to come out. Lubrication around CZPTs is important as grease can damage the components and cause bigger problems. A tractor’s CZPT fittings are part of the tractor’s electrical system, so it is important to replace them when they become damaged.

Grease CZPTs allow the addition of grease at the manufacturer’s specifications. These fittings consist of a spring and metal ball inside a nipple. The grease gun compresses the spring and releases the ball from the nipple opening. Grease CZPTs are essential parts of heavy equipment, as a failed grease CZPT may cause brake failures and other systems to fail. Failure to maintain these fittings can cause rollover accidents.

Greasing the CZPTs is a vital part of regular tractor maintenance. Greasing the CZPTs will prevent your tractor’s bearings from sticking and make your work easier. Grease the CZPTs on pivot points and joints to keep them lubricated and running smoothly. For easy grease application, consider using a battery-powered grease gun. Once you have lubricated the CZPTs, you can move on to other parts of the tractor.

In addition to grease, you should check for leaks on your tractor’s CZPTs regularly. If you notice dirt buildup, there might be a leak. You can also check for any worn hoses to avoid major problems. If there is a leak, tighten the fittings and replace worn ones as soon as possible to avoid further damage. By performing these tasks regularly, you can increase the efficiency of your tractor and avoid unexpected breakdowns.

China 52cc Gas Powered Post Hole Digger Digging Tools with High Quality     wholesaler China 52cc Gas Powered Post Hole Digger Digging Tools with High Quality     wholesaler
editor by czh2023-04-03

Tags